VVSV-NO 常開
STEALTH-VAC? ESD-SAFE Kit - Normally Open VACUUM PEN? - Operates On Compressed Air Or Nitrogen
The STEALTH-VAC? operates directly on 30 to 70 psi FILTERED compressed air or nitrogen. The vacuum is normally ON. The compressed-air-powered tools are our most powerful VACUUM TWEEZER? tools. The vacuum level can be controlled by adjusting the input pressure. At 10 psi input the vacuum level is 2 InHg with 1 lpm of free air flow, at 30 psi input the vacuum level is 10 InHg with 3 lpm of free air flow and at 70 psi input the vacuum level is 20 InHg with 4 lpm of free air flow. Includes five bent probes mounted with Non-marking Static Dissipative Buna-N Cup sizes 3/32” (2.38mm), 1/8” (3.18mm), 3/16” (4.76mm), 1/4” (6.35mm), and 3/8” (9.53mm), as well as four straight probes mounted with Non-marking Static Dissipative Buna-N Cup sizes 1/8” (3.18mm), 1/4” (6.35mm), 3/8” (9.53mm) and 1/2” (12.70mm).
The normally opened STEALTH-VAC? Kit includes:
STEALTH-VAC? NORMALLY OPEN VACUUM PEN?
COILED-VACUUM-HOSE-6 (VCH-1/16-6)
SET OF NINE VACUUM TIPS (VCS-9-B)
1/8” NPT TO 1/16” BARB THREADED ADAPTER FOR
SUPPLY LINE (V3014-1/8NPT)
STEALTH-VAC? is ready for use as follows:
1. Attach a VACUUM TWEEZER? tip slightly smaller than the
part you need to handle.
2. Merely touch the vacuum tip squarely to the part. The part is
now grasped.
3. Move the part to where you want it. Tap the control button to
release the part.
SIDALTH-VAC專利ESD-安全套件-常開真空筆-在壓縮空氣或氮?dú)馍喜僮?/p>
Stualth-Vac阱直接操作在30至70 PSI過濾的壓縮空氣或氮?dú)馍稀Ｕ婵粘ｉ_(kāi)。壓縮空氣動力工具是我們最強大的真空鑷子工具。真空度可通過調節輸入壓力來控制。在10psi輸入時，真空度是2InHg，自由空氣流量為1lpm；在30psi輸入時，真空度是10InHg，自由空氣流量為3lpm；在70psi輸入時，真空度是20InHg，自由空氣流量為4lpm。包括五個彎曲探針，安裝有無標記靜態耗散Buna-N杯尺寸3/32“(2.38mm)、1/8“(3.18mm)、3/16“(4.76mm)、1/4“(6.35mm)和3/8”(9.53mm)，以及四個安裝有無標記靜態耗散Buna-N杯尺寸1/8“(3.18mm)、1/4”(6.3)的直線探針。5毫米），3/8英寸（9 53mm）和1/2英寸（12 70mm）。
常開的STIALTH-VAC組件包括：
常開真空筆
真空-HOSE-6（VCH-1/16-6）
九個真空尖端組（VCS-9B）
1/8“NPT至1/16”倒鉤螺紋適配器
供電線路（V3014-1/8NPT）
Stualth-Vac Sube準備使用如下：
1。安裝一個真空鑷子，尖端略小于
你需要處理的部分。
2。只需將真空尖端直接接觸到零件即可。部分是
現在抓住了。
三。把零件移到你想要的地方。點擊控制按鈕
釋放零件。
STEALTH-VAC? ESD-SAFE Kit - Normally Open VACUUM PEN? - Operates On Compressed Air Or Nitrogen
The STEALTH-VAC? operates directly on 30 to 70 psi FILTERED compressed air or nitrogen. The vacuum is normally ON. The compressed-air-powered tools are our most powerful VACUUM TWEEZER? tools. The vacuum level can be controlled by adjusting the input pressure. At 10 psi input the vacuum level is 2 InHg with 1 lpm of free air flow, at 30 psi input the vacuum level is 10 InHg with 3 lpm of free air flow and at 70 psi input the vacuum level is 20 InHg with 4 lpm of free air flow. Includes five bent probes mounted with Non-marking Static Dissipative Buna-N Cup sizes 3/32” (2.38mm), 1/8” (3.18mm), 3/16” (4.76mm), 1/4” (6.35mm), and 3/8” (9.53mm), as well as four straight probes mounted with Non-marking Static Dissipative Buna-N Cup sizes 1/8” (3.18mm), 1/4” (6.35mm), 3/8” (9.53mm) and 1/2” (12.70mm).
The normally opened STEALTH-VAC? Kit includes:
STEALTH-VAC? NORMALLY OPEN VACUUM PEN?
COILED-VACUUM-HOSE-6 (VCH-1/16-6)
SET OF NINE VACUUM TIPS (VCS-9-B)
1/8” NPT TO 1/16” BARB THREADED ADAPTER FOR
SUPPLY LINE (V3014-1/8NPT)
STEALTH-VAC? is ready for use as follows:
1. Attach a VACUUM TWEEZER? tip slightly smaller than the
part you need to handle.
2. Merely touch the vacuum tip squarely to the part. The part is
now grasped.
3. Move the part to where you want it. Tap the control button to
release the part.
SIDALTH-VAC專利ESD-安全套件-常開真空筆-在壓縮空氣或氮?dú)馍喜僮?/p>
Stualth-Vac阱直接操作在30至70 PSI過濾的壓縮空氣或氮?dú)馍稀Ｕ婵粘ｉ_(kāi)。壓縮空氣動力工具是我們最強大的真空鑷子工具。真空度可通過調節輸入壓力來控制。在10psi輸入時，真空度是2InHg，自由空氣流量為1lpm；在30psi輸入時，真空度是10InHg，自由空氣流量為3lpm；在70psi輸入時，真空度是20InHg，自由空氣流量為4lpm。包括五個彎曲探針，安裝有無標記靜態耗散Buna-N杯尺寸3/32“(2.38mm)、1/8“(3.18mm)、3/16“(4.76mm)、1/4“(6.35mm)和3/8”(9.53mm)，以及四個安裝有無標記靜態耗散Buna-N杯尺寸1/8“(3.18mm)、1/4”(6.3)的直線探針。5毫米），3/8英寸（9 53mm）和1/2英寸（12 70mm）。
常開的STIALTH-VAC組件包括：
常開真空筆
真空-HOSE-6（VCH-1/16-6）
九個真空尖端組（VCS-9B）
1/8“NPT至1/16”倒鉤螺紋適配器
供電線路（V3014-1/8NPT）
Stualth-Vac Sube準備使用如下：
1。安裝一個真空鑷子，尖端略小于
你需要處理的部分。
2。只需將真空尖端直接接觸到零件即可。部分是
現在抓住了。
三。把零件移到你想要的地方。點擊控制按鈕
釋放零件。