咨詢熱線
0512-66324802
產品中心
V8901-A-ESD
0.00
0.00
PEN-VAC, ESD safe, 5 3/4" silver body, kit with (3) bent probes with 1/8", 1/4" and 3/8" cups and (1) straight probe with 1/4" diameter conductive silicone cups.
The PEN-VAC is totally self-contained. There are no batteries or hoses to get in the way. Operation is as follows:1. Select a tip with a rubber vacuum cup on a probe that is slightly smaller than the part you want to pick and place. Put the probe snuggly on the tip of the vacuum pen. Make sure that there is no dust on the rubber vacuum tip. NOTE: Our larger rubber vacuum cups can be placed directly on the vacuum pen tip without using a probe.
2. Depress AND hold the button on the side of the tool.
3. Touch the vacuum tip squarely to the part and release the button. The part is now grasped.
4. Move the part to where you want it and depress the button again. The part is now released.
NOTE: This tool works only with the rubber vacuum tips. The rubber is required for an air-tight seal.
pen-vac，防靜電，5 3 / 4“銀色的身體，包（3）1 / 8“彎曲探頭，1 / 4“和3 / 8杯（1）1 / 4“直徑導電硅杯直探頭。
pen-vac是完全獨立的。沒有電池或軟管堵塞。操作如下：
1。在探針上選擇一個橡膠真空杯，比你要選擇和放置的部分稍小一些。把探針snuggly在真空鋼筆尖。確保橡膠真空尖端沒有灰塵。注：我們的較大的橡膠真空杯可以直接放置在真空筆尖不使用探針。
2。按下并按住工具一側的按鈕。
三.將真空尖端直接對準零件并松開按鈕。這部分現在掌握了。
4。把零件移到你想要的地方，再按下按鈕。該部分現已發布。
注：此工具只適用于橡膠真空提示。氣密密封需要橡膠。